Impedance Matching: Enabling an RL-Based Running Jump in a Quadruped Robot

Neil Guan, Shangqun Yu, Shifan Zhu, Donghyun Kim
4/23/2024
cs.ROcs.LG

No confident code implementation found for this paper.

Abstract

Replicating the remarkable athleticism seen in animals has long been a challenge in robotics control. Although Reinforcement Learning (RL) has demonstrated significant progress in dynamic legged locomotion control, the substantial sim-to-real gap often hinders the real-world demonstration of truly dynamic movements. We propose a new framework to mitigate this gap through frequency-domain analysis-based impedance matching between simulated and real robots. Our framework offers a structured guideline for parameter selection and the range for dynamics randomization in simulation, thus facilitating a safe sim-to-real transfer. The learned policy using our framework enabled jumps across distances of 55 cm and heights of 38 cm. The results are, to the best of our knowledge, one of the highest and longest running jumps demonstrated by an RL-based control policy in a real quadruped robot. Note that the achieved jumping height is approximately 85% of that obtained from a state-of-the-art trajectory optimization method, which can be seen as the physical limit for the given robot hardware. In addition, our control policy accomplished stable walking at speeds up to 2 m/s in the forward and backward directions, and 1 m/s in the sideway direction.

View on arXivView PDF

Code Implementations

No confident code match yet

We couldn't find an author-owned or strongly-evidenced community implementation for this paper. Any repos shown below are weak matches — verify before relying on them.

No code implementations found yet.

Know of an implementation? Let us know in the comments below!

Similar Papers

Cite this paper

@article{guan2024impedance,
  title  = {Impedance Matching: Enabling an RL-Based Running Jump in a Quadruped Robot},
  author = {Neil Guan and Shangqun Yu and Shifan Zhu and Donghyun Kim},
  year   = {2024},
  eprint = {2404.15096},
  archivePrefix = {arXiv},
  url    = {http://arxiv.org/abs/2404.15096v2}
}

Add a badge to your README

Shows whether official code is linked for this paper.

Code of Paper badge
[![Code of Paper](https://codeofpaper.com/badge/2404.15096.svg)](https://codeofpaper.com/paper/2404.15096)

Discussion